Steel Structure Hangar in Australia

Home » Products » Steel Structures » Hangar » Steel Structure Hangar in Australia

The steel structure building takes up 39×32 square meters, with a partial second floor. The eave is 7.5meter high and span is 32 meters wide, with the drainage slope of 5%. The wall panel is made of color steel panel and glass wool sandwich panel with a thickness of 100m. This panel has a volume weight of 64kg/m3, conductivity factor being less than 0.045w/mk, average fibre diameter equal to or beyond 5um. As an A rating incombustible material, the panel is particularly suitable for buildings requiring high fireproofing standard. With a thickness of 0.5mm, the stone gray colored steel panel on either side of the glass wool sandwich panel renders the hangar clean and comfortable.

Feedback Form
Other products
  • Steel Workshop used as Auto Parts Plant This steel workshop is used in manufacturing auto parts. The steel workshop takes up 8,000 square meters with a size of 127.5m×60m. It has an eave of 9.8meters high, a span of 48 meters and a drainage slope of 5%. The auto parts plant has the wall panel under 1.2 meters made of brick MU10 and motar M5, thus achieving a steady and reliable performance with thermal insulation.
  • Steel Structure Building Case : Menggu Steel Structure Rack The steel structure rack, with a height of 2 meters, takes up 3,000 square meters. Equipped with an extra second floor, it uses 150t steel and costs 975,000 RMB. The building presents both practical utilization and aesthetical entertainment. It features flexible composition and easy installation. Doors and windows can be installed at any positions while separate walls can be built at any transverse axis ...